MOXA OBU-102-SS-ST Optical Fiber Bypass Unit

MOXA OBU-102-SS-ST Optical Fiber Bypass Unit

MOXAMedia Converters & ConnectivityOBU-102-SS-ST

4 x Single-Mode Fiber ST Female Connector Redundant dual 12/24/48 VDC power inputs IP30-rated metal body design DIN-rail mounting ability Ultra-low power consumption 0.72 W -20 to 70°C operating temperature

Tags & Features

Operating Temperature (-20 to 70°C)Relative Humidity (5 to 95% non-condensing)IP protection (IP30)Shock (IEC 60068-2-27)Vibration (IEC 60068-2-6)Freefall (IEC 60068-2-31)

Moxa’s OBU-102 fiber-optic bypass units add bypass relay functionality to any network node. In linear topologies, a single power outage or node failure can take out an entire chunk of the network, because communications to all the network nodes further down the line are also cut. With relay bypass, that node is bypassed in the event of a failure, and the rest of the network is unaffected. Bypass Relay Functionality The OBU-102 Series sits between a node and the network to add bypass relay functionality to any network switches that do not already support this important function. In normal operations, the OBU-102 Series acts as a gateway that forwards network traffic to and from the network switch. However, if power is lost, the OBU-102 will bypass the unpowered switch and simply pass network traffic to the next switch in the relay.

Specifications

Interface

Ports:
4 x Single-Mode Fiber, ST Female Connector

Power Parameters

Input Current:
0.1 A @ 48 VDC
Input Voltage:
12/24/48 VDC, Redundant dual inputs
Reverse Polarity Protection:
Supported

Bypass Properties

Insertion Loss:
1.6 dB (max.)
Optical Switching Time:
10 ms (max.)

Physical Characteristics

Weight:
700 g
Housing:
Metal
Dimensions:
53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Installation:
DIN-rail mounting, Wall mounting (with optional kit)
Storage Temperature:
-40 to 85°C (-40 to 185°F)
Operating Temperature:
-20 to 70°C (-4 to 158°F)
Ambient Relative Humidity:
5 to 95% (non-condensing)
Standards and Certifications:
Safety: UL 508; EMC: EN 55032/24; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m, IEC 61000-4-4 EFT: Power: 2 kV, IEC 61000-4-5 Surge: Power: 2 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 PFMF; Freefall: IEC 60068-2-31; Shock: IEC 60068-2-27; Vibration: IEC 60068-2-6; IP30

Rotary Switch Configuration

Boot Delay Interval:
10 steps, each step represents a 5 second delay